Table of Contents Thank you for purchasing SureCall’s Fusion2Go 2.0 cell phone signal booster kit. Fusion2Go 2.0 provides enhanced voice, text and 4G data signal for any vehicle. If you have any questions during setup, please reach out to our US-based experienced support technicians: •...
How It Works How It Works The SureCall Fusion2Go 2.0 is a high-quality bidirectional booster that enhances cellular signals for vehicles. The Fusion2Go 2.0 works with two antennas: • An inside antenna that communicates with your cell phone. • An outside antenna that communicates with the cell tower.
Warning: Unauthorized antennas, cables, and/or coupling devices are prohibited by FCC new rules. Please contact FCC for details: 1-888-CALL-FCC. Changes or modifications not expressly approved by SureCall could void the user’s authority to operate the equipment. SureCall | 48346 Milmont Drive, Fremont CA 94538 | 1-888-365-6283 | Support@surecall.com...
Choose a location that is at least 4 inches (10cm) away from metal and affix the antenna to the chosen surface. Then run the connected cable to the planned location of the booster. SureCall | 48346 Milmont Drive, Fremont CA 94538 | 1-888-365-6283 | Support@surecall.com...
3. Laboratory tests show that patch antennas can work from as close as 2 ft. from the outside antenna if the patch antenna is facing away from the outside antenna. SureCall | 48346 Milmont Drive, Fremont CA 94538 | 1-888-365-6283 | Support@surecall.com...
WARNING. The booster is rated for 5-15V input voltage. DO NOT use the booster with a higher voltage power supply. This can damage the booster and/or cause personal injury. SureCall | 48346 Milmont Drive, Fremont CA 94538 | 1-888-365-6283 | Support@surecall.com...
Connect the power supply to an alternate power source. Verify that the power source is operational and the fuse is intact. If the POWER LED on the signal booster is OFF, return the power supply to SureCall. Contact tech support at to receive an RMA at: 1-888-365-6283 or support@surecall.com.
3.5 dB, especially where the output signal is re-radiated and can cause interference to adjacent band users. This power reduction is to be by means of input power or gain reduction and not by an attenuator at the output of the device. SureCall | 48346 Milmont Drive, Fremont CA 94538 | 1-888-365-6283 | Support@surecall.com...
-2.7 dB -3.2 dB -5.8 dB -3.98 dB \ Tabletop Antenna Cable SC174-10 ft (10 ft) -5.96 dB *All equivalent antennas and cables are suitable for use with the Fusion2Go 2.0 Component Prod No. Description Gain Notes LTE-A LTE-V 800 MHz...
Page 11
*Input power level is decreased before reaching AGC -0.5 dB to maintain compliance with the intermodulation product of -13 dBm. Mean power: Measurements obtained on section 6.2 where Pmean = P01+3dB SureCall | 48346 Milmont Drive, Fremont CA 94538 | 1-888-365-6283 | Support@surecall.com...
FCC and IC Information SureCall has made a good faith effort to ensure the accuracy of the information in this document and disclaims the implied warranties of merchantabil- ity and fitness for a particular purpose and makes no express warranties, except as may be stated in its written agreement with and for its customers.
Page 13
Buyers may obtain an RMA number for warranty returns by calling the SureCall Return Department toll-free at 1-888-365-6283. Any returns received by SureCall without an RMA number clearly printed on the outside of the shipping container will be returned to sender. In order to receive full credit for signal boosters, all accessories originally included in the signal booster box must be returned with the signal booster.
Page 14
48346 Milmont Drive Fremont, California 94538, USA 888.365.6283 www.surecall.com...
Need help?
Do you have a question about the Fusion2Go 2.0 and is the answer not in the manual?
Questions and answers