Table of Contents
Advertisement
4-16 Configuring Your Server
Option
Parameter
Power ON Delay
[20] - 255
Time (Sec)
Platform Event
Disabled
Filtering
[Enabled]
IMPORTANT:
Power Supply), select [Server] - [AC LINK] - [Power On].
The table below shows the operation when the AC power to the server is turn off once and then on
again, depending on the setting of "AC LINK."
System status before AC power off
Operating
Aborting (DC power being off also)
Forced shutdown
* Press the power switch continuously for four seconds or longer. This forcibly turns off the power.
Description
Specify the power on delay time within
the range between 20 and 255
seconds. The specified time is valid
when "Power On" or "Last State" is
specified for AC LINK.
Specify whether to enable or disable
the platform event filtering (PEF)
feature.
To power on the server from the UPS (Uninterruptible
Setting of AC LINK
Stay Off
Off
Off
Off
[
Last State
Power On
On
On
Off
On
Off
On
Your Setting
]: Factory-set
Advertisement
Table of Contents
