Table of Contents
Advertisement
Advanced
Option
Boot-time Diagnostic
Screen
Reset Configuration Data
NumLock
Memory/Processor Error
IMPORTANT:
"Yes" for [Reset Configuration Data], because the information on boot
device will be cleared. Select [Exit Saving Changes] to restart the
system, run BIOS SETUP utility, and provide settings for boot device
order again.
Parameter
Description
Enabled
When enabled, the BIOS will display
the POST progress.
[Disabled]
When disabled, the BIOS will display
the NEC logo during POST.
Cannot be disabled during console
redirection.
[No]
Select "Yes" if you want to clear the
system configuration data during the
Yes
next boot. Automatically reset to
"No" in the next boot.
On
Enables or disables Numlock feature
at system startup.
[Off]
[Boot]
If "Halt" is selected, the boot is
stopped when POST error occurs.
Halt
Be sure to take a note of boot priority before selecting
Configuring Your Server 4-7
Your Setting
[
]: Factory-set
Advertisement
Table of Contents
