Table of Contents
Advertisement
5-28 Installing the Operating System with Express Setup
Setting WOL
Refer to the following procedure to enable WOL.
1.
Start Device Manager.
2.
Point to [Network adapters] and double click [Intel(R) 82576 Gigabit Dual Port Server
Network Connection]/[Intel(R) 82576 Gigabit Dual Port Server Network Connection #2]
to open the adapter [Properties].
3.
Click [Power Management] tab and change setting in [Wake On LAN] according to the
following list.
Setting item
"Wake On Directed Packet"
"Wake On Magic Packet"
"Wake on Magic Packet from power off state"
NOTES:
[Power Saver Options] setting is not necessary to change.
Above setting will maintained until manually resetting are
executed.
IMPORTANT: The parameters of [Wake On LAN] will not exist, if
the network port is not available of WOL.
4.
Click [OK].
5.
Restart the system.
IMPORTANT:
WOL (Wake On LAN) is available only in system Shutdown
mode.
WOL (Wake On LAN) is not available in system Hibernate and
Sleep mode.
Default setting
Change setting
ON
OFF
ON
OFF
OFF
ON
Advertisement
Table of Contents
