Table of Contents
Advertisement
Upgrading Your Server 9-37
IMPORTANT:
The DIMM is extremely sensitive to static electricity. Make sure to
touch the metal frame of the server to discharge static electricity
from your body before handling the DIMM. Do not touch the
DIMM terminals or on-board parts by a bare hand or place the
DIMM directly on the desk. For static notes, see the section "Anti-
static Measures" described earlier.
Make sure to use the DIMM authorized by NEC. Installing a third-
party DIMM may cause a failure of the DIMM as well as the server.
Repair of the server due to failures or damage resulted from
installing such a board will be charged.
Purchase DIMMs of the following models:
– N8102-330 Additional 1GB memory board
– N8102-331 Additional 2GB memory board
– N8102-332 Additional 4GB memory board
– N8102-333 Additional 8GB memory board
– N8102-338 Additional 16GB memory board
– N8102-356 Additional 2GB memory board (1GB ×2)
– N8102-357 Additional 4GB memory board (2GB ×2)
– N8102-358 Additional 8GB memory board (4GB ×2)
– N8102-359 Additional 16GB memory board (8GB ×2)
– N8102-360 Additional 32GB memory board (16GB ×2)
Advertisement
Table of Contents
