4-94 Configuring Your Server
Setting Hot Spare
Described below are procedures based on assumption:
Add a Hard Disk Drive to a RAID5 VD configured with three Hard Disk Drives and assign a newly
added Hard Disk Drive as Hot Spare Disk.
1.
Start WebBIOS.
Make sure that the status for the added Hard Disk Drive is indicated as "Unconfigured
Good" in the right frame of the Top Menu.
2.
Select the newly connected Hard Disk Drive (the Hard Disk Drive in slot number 3 in the
example) from the right frame of Top Menu.
3.
The properties for Physical Drive is displayed.