Table of Contents
Advertisement
Locate:
Make Global HSP
Make Dedicated HSP
Remove HOTSPARE
Make Unconf Bad
Make Unconf Good
Prepare Removal
Undo Removal
Make Dive Offline
Make Drive Online
Rebuild Drive
Mark as Missing
IMPORTANT:
Physical Drive Properties
Let Disk Status lamp light or blinks.
The selected Hard Disk Drive is assigned as hot-spare available for all
DGs.
The selected Hard Disk Drive is assigned as hot-spare available only for
the specific DG.
The selected Hard Disk Drive is unassigned from hot-spare and made
Unconfigured Good state.
Make the selected Hard Disk Drive in faulty state. This is indicated on
the Hard Disk Drive of which status is "Unconfigured Good".
Make the selected Hard Disk Drive in "Unconfigured Good" state. This is
indicated on the Hard Disk Drive of which status is "Unconfigured Bad".
Make the power status of the selected Hard Disk Drive in "Powersave"
state.
This is indicated on the Hard Disk Drive of which power status is "On"
and the status is "Unconfigured Good".
Make the power status of the selected Hard Disk Drive in "On".
This is indicated on the Hard Disk Drive of which power status is
"Powersave".
Make the selected Hard Disk Drive in "Offline" state.
This is indicated on the Hard Disk Drive of which status is "Online".
Make the selected Hard Disk Drive in "Online" state.
This is indicated on the Hard Disk Drive of which status is "Offline".
Start rebuilding VD that contains the selected Hard Disk Drive.
This is indicated for the Hard Disk Drive of which status is "Offline".
Remove the VD that contains the selected Hard Disk Drive from the DG.
This is indicated on the Hard Disk Drive of which status is "Offline".
The RAID Controller does not support Events feature.
Configuring Your Server 4-69
Advertisement
Table of Contents
