Table of Contents
Advertisement
7.
Select the [Intel(R) ICH10R SATA AHCI Controller] and press Enter.
The screen of Step 5 is displayed.
If the Internal RAID Controller (equivalent to N8103-116A) or
N8103-116A/117A/118A is used:
Press S.
The screen of Step 6 is displayed. Press Enter, and go to Step 8.
If the Internal RAID Controller (equivalent to N8103-116A) or
N8103-116A/117A/118A is not used:
Go to Step 9.
8.
Select the proper Controller and press Enter.
The screen of Step 5 is displayed.
– [LSI MegaRAID SAS RAID Controller Driver (Server 2003 32-bit)]
(When Internal RAID Controller (equivalent to N8103-116A) is installed.)
– [LSI MegaRAID SAS RAID Controller Driver (Server 2003 32-bit)]
(When N8103-116A/117A/118A RAID Controller is installed.)
– [LSI Embedded MegaRAID (Windows XP/2003)]
(When Onboard RAID Controller (LSI Embedded MegaRAID) is used.)
9.
<If the SCSI Controller N8103-75/107 is connected>
Press S.
The screen of Step 6 is displayed. Press Enter, and go to Step 10.
<If the SCSI Controller N8103-75/107 is not connected>
Go to Step 11.
10.
A list of mass storage devices is displayed.
Select the [Adaptec Ultra320 SCSI Cards (Windows 32-bit)] and press Enter.
IMPORTANT:
the N8103-75/107 SCSI controller, press S.
The screen of Step 5 is displayed.
Go to Step 11.
If the following message is displayed when you use
The driver you provided seems to be newer
than the Windows default driver.
Windows already has a driver that you can use
for "Adaptec Ultra320 SCSI Cards (Windows
32-bit)"
Unless the device manufacturer prefers that
you use the driver on the floppy disk, you
should use the driver in Windows.
Installing Windows Server 2003 F-9
Advertisement
Table of Contents
