Removing The Upper Housing - Epson Perfection V700 Photo Service Manual

EPSON Perfection V700 Photo
4.2.2

Removing the Upper Housing

1. Remove the TPU Unit. See Section 4.2.1 on page 39.
2. Remove the Upper Housing Cap according to the following procedure.
1. Prepare a sharp-pointed screw. Any size will work.
2. Stick the screw into the center of the Upper Housing Cap.
Upper Housing Cap
Sharp-pointed screw
1
Figure 4-5. Removing the Upper Housing Cap (1)
Disassembly / Assembly
C A U T I O N
3. Turn the screw with a driver until it gets enough grip to pull the
Upper Housing Cap, and pull the cap out.
4. Remove the other three Upper Housing Caps using the same
procedure.
3. Release the Carriage Lock by sliding its tab in the direction of the
arrow.
2
Disassembly Procedure
When performing the next step, be careful not to turn the
sharp-pointed screw too much, or the screw may go through
the Upper Housing Cap and damage the screw beneath the cap.
Figure 4-6. Removing the Upper Housing Cap (2)
Lock
Carriage Lock
Figure 4-7. Releasing the Carriage Lock
Revision A
UnLock
40