Epson Perfection V700 Photo Service Manual page 33

Hide thumbs Also See for Perfection V700 Photo:
Table of Contents

Advertisement

EPSON Perfection V700 Photo
Step
Possible Cause
The Carriage FFC is not connected to the Connector CN5 on the Main
1
Board.
2
Carriage Unit failure
3
Main Board failure
Step
Possible Cause
The OPTION Connector CN7 on the main unit and the DRV Board
1
Connector CN2 are not connected with the TPU Unit cable.
2
The TPU Carriage Lock has not been released.
3
The TPU Lower Housing is not installed correctly.
The TPU Carriage Mechanism has failed
• The TPU CR Motor does not move normally when powered-on
4
with the TPU Lower Housing removed.
• The TPU Carriage Unit does not move normally with the TPU CR
Motor removed.
5
TPU CR Motor failure
6
DRV Board failure
7
Main Board failure
Step
Possible Cause
The OPTION Connector CN7 on the main unit and the DRV Board
1
Connector CN2 are not connected with the TPU Unit cable.
The Lamp Connector is not connected to Connector CN2 and CN3 on
2
the TPU Inverter Board.
Connector CN1 on the TPU Inverter Board and Connector CN3 on the
3
SUB_B Board are not connected to the cable.
The DRV-SUB_B FFC is not connected to Connector CN1 on the
4
SUB_B Board and Connector CN4 on the DRV Board.
5
TPU Inverter Board failure
6
DRV Board failure
7
Main Board failure
Troubleshooting
Table 3-8. The Fluorescent Lamps are Not Lit (Main Unit)
Connect the FFC to the Connector CN5 on the Main Board.
Replace the Carriage Unit.
Replace the Main Board.
Table 3-9. The TPU Carriage Unit Does Not Operate
Connect the connectors with the TPU Unit cable.
Release the TPU Carriage Lock.
Reinstall it correctly.
Replace the TPU Carriage Unit.
Replace the TPU CR Motor.
Replace the DRV Board.
Replace the Main Board.
Table 3-10. The Fluorescent Lamps of the TPU Do Not Light Up
Connect the connectors with the TPU Unit cable.
Connect the Lamp Connector to CN2 and CN3 connectors on the TPU
Inverter Board.
Connect CN1 and CN3 with the cable.
Connect the DRV-SUB_B FFC to CN1 on the SUB_B Board and
CN4 on the DRV Board.
Replace the TPU Inverter Board.
Replace the DRV Board.
Replace the Main Board.
Troubleshooting
Corrective Action
Corrective Action
Corrective Action
Revision A
Reference
See Section 4.2.5 on page 46. (Figure 4-20)
See Section 4.2.6 on page 48.
See Section 4.2.5 on page 45.
Reference
See Section 4.2.1 on page 39.
See Section 4.2.11 on page 57.
See Step 3 of Section 4.2.9 on page 54.
See Section 4.2.9 on page 54.
See Section 4.2.10 on page 55.
See Section 4.2.16 on page 63.
See Section 4.2.14 on page 61.
See Section 4.2.5 on page 45.
Reference
See Section 4.2.1 on page 39.
See Section 4.2.11 on page 57.
See Section 4.2.12 on page 58. (Figure 4-47)
See Section 4.2.12 on page 58. (Figure 4-46
and Figure 4-47)
See Section 4.2.10 on page 56. (Figure 4-40)
See Section 4.2.14 on page 61. (Figure 4-54)
See Section 4.2.12 on page 58.
See Section 4.2.14 on page 61.
See Section 4.2.5 on page 45.
33

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents