Epson Perfection V700 Photo Service Manual page 41

EPSON Perfection V700 Photo
The Perfection V700 Photo is equipped with two kinds of
C A U T I O N
spacers (Adjuster Spacer and Adjuster B Spacer) to adjust the
gap between the Carriage and the Upper Housing Glass so that
the dual lens system function is ensured.
The number of spacers and their positions vary from unit to
unit. Care should be exercised not to move or lose the spacers.
Spacer
Figure 4-8. Cautions for Spacers
In case of loss of the spacers or accidental removal of them
losing their original places, replace the Lower Housing.
The Lower Housing Assy. ASP is provided with factory-
installed spacers.
Disassembly / Assembly
The Lower Housing Assy. ASP, however, does not include the following
parts. Remove them from the previous Lower Housing Assy. and reinstall
them to the new one. (Refer to
and Service Parts List on page
1. Main Board
2. Upper Main Board Cover
3. Lower Main Board Cover
4. USB Dust-Resistant Foam
5. Ferrite Core
6. Main Board Cover Sheet
7. Front Cover
5
Disassembly Procedure
Chapter7 Exploded Diagram on page 84
89.)
8. Harness B Cover
9. Harness C Cover
10. FFC Cover
11. Ground Plate
12. Carriage Unit
13. Carriage Shaft
4
3
1
12
13
7
Revision A
2
6
9
11
10
8
41