Netfinity Manager Documentation; Netfinity Manager System Requirements; Netfinity Manager For Os/2 System Requirements - IBM xSeries 230 6RY Hardware Maintenance Manual

Netfinity Manager documentation

The Netfinity directory on the ServerGuide Netfinity Applications CD contains online
versions (*.PDF format) of all Netfinity Manager documentation. For more
information on included documentation, see "Getting more information about
Netfinity Manager" on page 113.

Netfinity Manager system requirements

The minimum system requirements for Netfinity Manager vary based on which
supported operating system is running on your system.
v If you are installing Netfinity Manager for OS/2, see "Netfinity Manager for
v If you are installing Netfinity Manager for Windows 95 (or Windows 98), see
v If you are installing Netfinity Manager for Windows NT, see "Netfinity Manager

Netfinity Manager for OS/2 system requirements

The minimum system requirements for Netfinity Manager for OS/2 are:
v OS/2 version 3.0 or later
v Approximately 19 MB–22 MB of hard disk space (space required depends on
v A LAN adapter card and one or more of the following communications
v A 9600 baud or greater modem (optional).
The hard disk requirement for Client Services for Netfinity Manager is
6.5 MB–9 MB of hard disk space. All other system requirements are the same as
for Netfinity Manager for OS/2.
Note: Serial Connection Control will not function on systems that do not have a
88
Hardware Maintenance Manual: xSeries 230 Models 6RY, 61Y
OS/2 system requirements."
"Netfinity Manager for Windows 95 and Windows 98 system requirements" on
page 89.
for Windows NT system requirements" on page 89.
system configuration)
protocols:
– IBM TCP/IP for OS/2 version 1.2 or later (required for Netfinity Manager
with Web Enhancement)
– NetBIOS
Note: The Netfinity Manager NetBIOS requirements are three names, two
sessions, and nine network control blocks (NCBs).
– IPX
– SNA (IBM Communications Manager/2 version 1.1 only)
Note: Systems using Netfinity Manager with Microsoft SNA Server cannot
communicate with systems that run the Microsoft SNA Server client.
Netfinity Manager supports only server-to-server communications
between systems that run Microsoft SNA Server software. However,
Netfinity Manager systems running Microsoft SNA Server can
communicate with other Netfinity Manager systems using any of the
other supported SNA stacks.
properly installed and configured modem.