IBM xSeries 230 6RY Hardware Maintenance Manual page 106

1. Insert the Netfinity Manager CD into the CD-ROM drive (in this example,
2. Start an OS/2 window or full-screen session.
3. Make the CD-ROM drive the active drive.
4. Type the following command at the OS/2 prompt:
5. Press Enter.
Activating the database
The following information describes how to connect, bind, and grant privileges to
the database.
1. Connecting to the Database
2. Bind the package and the database
Granting and revoking database privileges
The following information describes how to grant and revoke database privileges.
Note: If your primary system is OS/2, refer to "Database privileges on OS/2
1. Start a DB2 command window.
2. Type the following command:
98
Hardware Maintenance Manual: xSeries 230 Models 6RY, 61Y
drive D; individual drive letters might be different).
Type D: and then press Enter.
NETFINDB CREATE /DBNAME=databasename /DRIVE=d
where databasename is the name of the database and d is the drive where the
database will be located.
Note: If any part of the database already exists, the utility program will create
only the portions of the database that are missing.
a. Start a DB2 command window.
b. Type the following command:
DB2 CONNECT TO databasename
where databasename is the name of the database as specified in the database
installation step.
c. Press Enter.
To prepare SQL statements stored in the bind file and store the package in the
database, perform the following steps from a system on which Netfinity
Manager for OS/2, Netfinity Manager for Windows 95, or Netfinity Manager
for Windows NT has been installed:
a. Open a DB2 command window.
b. In the DB2 command window, type the following command:
DB2 BIND x:\directory\DB2SQLC0.bnd
where x:\directory is the name of the drive and directory where Netfinity
Manager is installed.
c. Press Enter.
systems" on page 99.
Notes:
a. If it is not already running, start the DB2 database manager.
b. If you are not connected to the DB2 Netfinity database, connect to the
database now.
DB2 GRANT privilegecode ON TABLE tablename TO userid
where