Table of Contents
Advertisement
The model number and serial number are on the ID label on the right mounting
bracket on the server, as shown in the following illustration.
Note: This illustration shows a small computer system interface (SCSI) model
See the Rack Installation Instructions for complete rack installation and removal
instructions.
The IBM Eserver Documentation CD
The IBM Eserver Documentation CD contains documentation for your server in
Portable Document Format (PDF) and includes the IBM Documentation Browser to
help you find information quickly.
Hardware and software requirements
The IBM Eserver Documentation CD requires the following minimum hardware
and software:
v Microsoft Windows NT 4.0 (with Service Pack 3 or later), Windows 98, Windows
v 100 MHz microprocessor
v 32 MB of RAM
v Adobe Acrobat Reader 3.0 (or later) or xpdf, which comes with Linux operating
Using the Documentation Browser
Use the Documentation Browser to browse the contents of the CD, read brief
descriptions of the books, and view books using Adobe Acrobat Reader or xpdf.
The Documentation Browser automatically detects the regional settings in use in
your system and displays the books in the language for that region (if available). If
a book is not available in the language for that region, the English version is
displayed.
2
IBM Eserver 325 Type 8835: Installation Guide
server. An integrated drive electronics (IDE) non-hot-swap hard disk drive
model is also available. This illustration might differ slightly from your
hardware.
2000, or Red Hat Linux
systems
Note: Acrobat Reader software is included on the CD, and you can install it
when you run the Documentation Browser.
ID label
Advertisement
Table of Contents
