Connecting External Options; Installation Procedure - IBM xSeries 230 6RY Hardware Maintenance Manual

To install the server top cover:
1. Align the top cover with the top of the server, about 25 mm (1 inch) from the
2. Hold the cover against the server and slide the cover toward the front of the
Installing the bezel
To install the bezel:
1. Place the tabs on the left side of the bezel in the slots at the left front of the
2.

Connecting external options

If you install a SCSI adapter, you can attach a SCSI storage expansion enclosure to
your server.

Installation procedure

To attach an external device:
1. Read "Before you begin" on page 47' and the documentation that comes with
2. Turn off the server and all attached devices.
3. Follow the instructions that come with the option to prepare it for installation
72
Hardware Maintenance Manual: xSeries 230 Models 6RY, 61Y
1
Flange
2
Top cover
3
Side latches
4
Flange
front of the server; the flanges on the left and right sides of the cover should be
on the outside of the server chassis.
server until the cover clicks into place.
1
Trim bezel
server.
Press the right end of the bezel toward the server until the bezel clicks into
place.
your options.
and to connect it to the server.