Installing Options; Exploded View Of The Xseries 230 Server; System Board Layout - IBM xSeries 230 6RY Hardware Maintenance Manual

Installing options

This chapter provides instructions to help you add options to your server. Some
option-removal instructions are provided, in case you need to remove one option
to install another.

Exploded view of the xSeries 230 server

The orange color on components and labels in your server identifies hot-swap or
hot-plug components. This means that you can install or remove the component
while the system is running, provided that your system is configured to support
this function. For complete information about installing or removing a hot-swap
component, see the detailed procedures in this chapter.
The blue color on components and labels indicates touch points where a
component can be gripped, a latch moved, and so on.
The following illustration shows the locations of major components in your server.

System board layout

The illustrations in the following sections show the components on the system
board.
© Copyright IBM Corp. 2000
3
4
5
6
7
8
1
Terminator card
2
Microprocessor
3
DIMM
4
Power supply
5
Fan
6
Adapter-retention bracket
7
Adapter-support bracket
8
Fan (blower)
2 1
41