IBM xSeries 230 6RY Hardware Maintenance Manual page 101

v Predictive Failure Analysis
v Process Manager
v RAID Manager (requires RAID adapter)
v Remote Session
v Remote System Manager
v Remote Workstation Control
v Screen View
v Security Manager
v Serial Connection Control
v Service Configuration Manager
v Service Processor Manager
v Service Manager
v Software Inventory
v System Diagnostics Manager
v System Information Tool
v System Monitor
v System Partition Access (requires System Partition)
v Update Connector Manager (available only on systems running Windows
NT 4.0 or later)
v System Profile
v Web Manager Configuration (installed only if the Netfinity Manager
Installation with Web Enhancement installation configuration is selected)
Note: The graphical user interface (GUI) program files for DMI Browser, ECC
Memory Setup, System Partition Access, RAID Manager, and Predictive
Failure Analysis will be installed regardless of whether the system has a
DMI Service Layer, ECC Memory, a System Partition, a RAID adapter,
or a PFA-enabled disk drive. This enables a network administrator to
remotely access these services on other systems within a network.
However, the installation program installs the base program that
enables local use of the service only if the required hardware or system
configuration is present.
9. Configure the Network Drivers.
If the installation configuration allows for network access, enter information
regarding the communication protocols that are supported by the system. The
®
(requires PFA-enabled hard disk drive)
93
Netfinity Manager