IBM xSeries 230 6RY Hardware Maintenance Manual page 16

Rack model
Reset Button: Press this button to reset the server and run the power-on self-test
(POST).
Operator Information Panel: The lights on this panel give status information for
your server. See "Operator Information panel" on page 10 for more information.
Hard Disk Status Light: Each of the hot-swap drives has a Hard Disk Status light.
When this amber light is on continuously, the drive has failed. When the light
flashes slowly (one flash per second), the drive is being rebuilt. When the light
flashes rapidly (three flashes per second), the controller is identifying the drive.
Hard Disk Activity Light: Each of the hot-swap drives has a Hard Disk Activity
light. When this green light is flashing, the controller is accessing the drive.
Rear view
(tower shown)
8
Hardware Maintenance Manual: xSeries 230 Models 6RY, 61Y
1
Cover release latch
2
Serial number
3
Hard disk drive activity light
4
Hard disk drive status light
5
Reset button
6
Power control button
7
Power control button shield (if installed)
8
Operator information panel