Yamaha VX600ERG Service Manual page 39

A B
SEA2530
SEA2535
2
3
SEA2540
DRIVE CHAIN
CAUTION:
There is a magnet attached to the end of the
dipstick. It is used to remove any metal particles
that may accumulate in the drive chain housing.
Be sure to:
•
Pull the dipstick out slowly and gently so the
metal particles do not fall off the magnet back
into the drive chain housing.
•
Wipe off the magnet before reinserting the
dipstick into the drive chain housing.
•
Remove the dipstick and check that the oil is
between the upper a and lower b levels. If not,
add oil to the upper level.
Å For models without reverse transmissions
(SX600/MM600)
ı For models with reverse transmissions
(VX600ER/VT600)
Recommended oil:
Gear oil API "GL-3"
SAE #75 or #80
CAUTION:
Make sure that no foreign material enters the gear
case.
•
Reinsert the dipstick and fit the loop 2 of the
dipstick handle onto the projection 3 of the gear
case.
2-25
INSP
ADJ