Removal; Inspection; Installation - Yamaha VX600ERG Service Manual

SEA6100
WATER PUMP

REMOVAL

1. Remove:
•
Impeller 1
NOTE:
Attach the primary sheave holder to hold the primary
sheave.
Primary sheave holder:
SEA6070

INSPECTION

1. Inspect:
•
Impeller 1
•
Water pump cover 2
•
Thermostatic cover 3
Cracks/damage → Replace.
SEA6080

INSTALLATION

1. Install:
•
Impeller 1
NOTE:
Attach the primary sheave holder to hold the primary
sheave.
Primary sheave holder:
SEA6090
Bolt (impeller):
2. Fasten:
•
Plastic band 1
NOTE:
•
Fasten the carburetor heating hose 3 2 without
squashing it.
•
For VX600ER/VT600:
Clamp the starter motor lead 3 and carburetor
heating hose 3 2 together so that the white tape on
the starter motor lead 3 is positioned behind the
front bracket.
6-6
COOL
90890-01701, YS-01880
90890-01701, YS-01880
10 Nm (1.0 m · kg, 7.2 ft · lb)