ELECTRICAL STARTING SYSTEM
Assembly
Reverse the "Disassembly" procedure.
Note the following points.
1. Before installing the front bracket and rear bracket,
apply bearing grease to the bearings of the front
bracket and rear bracket.
2. Make sure the front bracket and rear bracket
cover are fitted with O-rings.
SEA8320
3. When installing the rear bracket assembly, take
care not to scratch the brushes.
4. Install:
•
NOTE:
Align the match marks 1 on the bracket with the
match marks 2 on the yoke.
SEA8330
8-17
ELEC
Securing bolts (starter motor)
–
+