Yamaha VX600ERG Service Manual page 31

SHEAVE DISTANCE AND OFFSET ADJUSTMENT
2
a
3
2
1
5. Adjust:
•
Sheave distance
Adjustment steps:
•
Loosen the mounting bolts (front) 1 and mount-
ing bolts (rear) 2.
•
Adjust the position of the engine so that the
sheave distance is within the specification.
•
Tighten the mounting bolts (front) 1 and mount-
SEA2370
ing bolts (rear) 2.
Mounting bolt (front):
Mounting bolt (rear):
SEA2380
6. Measure:
•
Secondary sheave free play (clearance) a
Use a thickness gauge.
Out of specification → Adjust.
Secondary sheave free play
(clearance):
SEA2390
7. Adjust:
•
Secondary sheave free play (clearance)
Adjustment steps:
•
Apply the brake to lock the secondary sheave.
•
Remove the bolt 1 and washer 2.
•
Adjust the secondary sheave free play (clear-
ance) by adding or removing a shim(s) 3.
SEA2400
Shim size:
Part number
90201-222F0
90201-225A4
2-17
INSP
ADJ
90 Nm (9.0 m · kg, 65 ft · lb)
57 Nm (5.7 m · kg, 41 ft · lb)
1.0 ~ 2.0 mm (0.04 ~ 0.08 in)
Thickness
0.5 mm (0.02 in)
1.0 mm (0.04 in)