Inspection - Yamaha VX600ERG Service Manual

PRIMARY SHEAVE AND DRIVE V-BELT
SEA4080
SEA4090
SEA4100
4-5

INSPECTION

1. Inspect:
•
Spider 1
•
Sliding sheave 2
•
Fixed sheave 3
•
Primary sheave cap 4
Cracks/damage → Replace.
2. Inspect:
•
Primary sheave spring 1
Cracks/damage → Replace.
3. Measure:
•
Primary sheave spring free length a
Out of specification → Replace the primary
sheave spring.
Primary sheave spring free length:
VX600ER/SX600:
89.4 mm (3.52 in)
MM600:
91.4 mm (3.60 in)
VT600 for U.S.A./Canada:
86.7 mm (3.41 in)
VT600 for Europe:
87.4 mm (3.44 in)
NOTE:
When changing the primary sheave springs, refer to
"GEAR SELECTION" in CHAPTER 2.
4. Inspect:
•
Primary sheave cap bush 1
•
Sliding sheave bush 2
Cracks/damage → Replace.
Clutch bushing press:
YS-42424
POWR
TR