Parking Brake Adjustment; Brake Lever Adjustment (Vx600Er/Sx600/Vt600) - Yamaha VX600ERG Service Manual

BRAKE LEVER ADJUSTMENT (VX60ER/SX600/VT600)

PARKING BRAKE ADJUSTMENT/

PARKING BRAKE ADJUSTMENT
1. Measure:
•
2. Adjust:
SEA2480
•
Adjustment steps:
•
Loosen the locknuts 1.
•
Turn the cable adjuster 2 in or out to until the
specified clearance between the brake pad 3
and disc 4 is obtained.
•
Turn the brake pad adjusting bolt 5 in or out until
the specified clearance between the brake pad 6
and disc 4 is obtained.
•
SEA2490
Tighten the locknuts.
BRAKE LEVER ADJUSTMENT
(VX600ER/SX600/VT600)
1. Adjust:
• Brake lever position
Adjustment steps:
•
Loosen the locknut 1.
•
While lightly pushing the brake lever in direction a,
turn the adjusting bolt 2 by fingers to set the brake
SEA2500
lever to the desired position.
•
Tighten the locknut securely after adjusting.
2-21
INSP
ADJ
Clearance a
Out of specification → Adjust.
Clearance:
1.2 ~ 1.3 mm (0.047 ~ 0.051 in)
Clearance a
(distance from the grip to the brake lever)
Locknut:
6 Nm (0.6 m · kg, 4.3 ft · lb)