Cable Routing - Yamaha VX600ERG Service Manual

CABLE ROUTING

1 Water temperature sensor
coupler
2 Fasten the carburetor switch
leads and water temperature
sensor leads and ignition coil
leads to the coolant hose with a
plastic band. For the VX600ER/
VT600, include the starter motor
and battery negative leads.
3 Ignition coil coupler
4 Connectors of the carburetor
switch
5 Fasten the starter motor and
battery negative leads and starter
relay leads to the coolant hose
with a plastic band. (VX600ER/
VT600)
6 Fasten the coolant reservoir hose
and coolant hose with a plastic
clamp.
7 Ensure this is not kink.
8 Fasten the starter motor and
battery negative leads to the
coolant hose with a plastic band
above the brake caliper.
(VX600ER/VT600)
9 Route the starter motor and
battery negative leads behind the
coolant hose. (VX600ER/VT600)
0 To the starter relay (VX600ER/
VT600)
A Brake hose
B To the battery negative terminal
(VX600ER/VT600)
C To the gear position switch
(VX600ER/VT600)
CABLE ROUTING
9-22
SPEC