Yamaha VX600ERG Service Manual page 282

O To the carburetor
P Vacuum hose
Q Oil delivery hose
R To the oil pump
S When fastening the wire harness
with the attaches clamp, bend the
clamp inward to fasten.
T Do not fasten.
U Fasten the wire harness at the
white tape mark, with a clamp.
V Oil hose
W Coolant reservoir hose
X To filler cap body
Y Passenger grip warmer relay
coupler (VX600ER/SX600/
MM600)
Z Passenger grip warmer relay
(VT600)
[ DC back buzzer (VX600ER/
VT600)
\ DC back buzzer coupler
(VX600ER/VT600)
] DC back buzzer coupler (SX600/
MM600)
` Connectors of the gear position
switch (SX600/MM600)
a Pass the brake hose through the
hose guide.
b Fasten the wire harness with a
plastic band. For the SX600/
MM600, include the connectors
of the gear position switch.
c Connectors of the gear position
switch (VX600ER/VT600)
d To the gear position switch
e Ensure this is not kink.
f Fasten the wire harness, fuel
tank breather hose and oil tank
breather hose with a plastic band.
g Install the starter lever to the
position as illustrated.
CABLE ROUTING
9-36
SPEC