Troubleshooting - Yamaha VX600ERG Service Manual

TROUBLESHOOTING

GRIP WARMER AND THUMB WARMER DO NOT OPERATE.
For VX600ER/VT600:
Check the main fuse and "IGNITION" fuse.
Refer to "FUSE INSPECTION" in CHAPTER 2.
OK FAULTY
For VX600ER/VT600:
Check the battery.
Refer to "BATTERY INSPECTION" in CHAPTER 2.
OK OUT OF SPECIFICATION
For SX600/MM600:
Check the condenser.
Refer to "IGNITION SYSTEM".
OK OUT OF SPECIFICATION
Check the stator coil and pickup coil.
Refer to "IGNITION SYSTEM".
OK OUT OF SPECIFICATION
Check the main switch.
Refer to "IGNITION SYSTEM".
OK NO CONTINUITY
Check the grip and thumb warmer.
OK NO CONTINUITY
Check the variable resistors.
CORRECT INCORRECT
Check the load control relay.
Refer to "IGNITION SYSTEM".
OK FAULTY
Correct the connection and/or
replace the rectifier/regulator
and/or CDI unit.
GRIP WARMER SYSTEM
Replace the main fuse and/or
"IGNITION" fuse.
Replace and/or charge the battery.
Refer to "BATTERY CHARGING" in CHAPTER 2.
Replace the condenser.
Replace the stator coil assembly.
Replace the main switch.
Replace the grip and/or thumb warmer.
Replace the variable resistors.
Replace the load control relay.
8-40
– +
ELEC