Setting Up The Product After Moving - Epson SureColor F9200 User Manual

9. While supporting the bracket for the media guide bar, use the large hexagon wrench to remove the
three screws securing the bracket. Then remove the bracket.
Parent topic:
Related tasks
Attaching the Media Guide Bar

Setting Up the Product After Moving

Follow these steps to set up the product after moving it.
1. Verify that the location is suitable for installation.
2. Reattach the media guide bar, if you removed it.
3. Perform parallel adjustment for the media feeding unit and auto take-up reel as necessary.
4. Install the waste ink bottle.
5. Connect the power cable to an electrical outlet and turn on the printer.
6. Load media in the product.
7. Perform a nozzle check and confirm that there are no clogged nozzles.
8. Align the print head and check the print quality.
Parent topic:
Related tasks
Replacing the Waste Ink Bottle
Attaching the Media Guide Bar
Moving or Transporting the Product
Moving or Transporting the Product
170