Saving Sets Of Media Settings - Epson SureColor F9200 User Manual

4. When you finish changing media settings, press the up or down arrow button to select Keep
Settings Above and press the OK button.
You see the roll type selection screen.
5. Press the up or down arrow button to select the roll type you loaded and press the OK button.
If you turned on the Remaining Setup setting, you see a prompt to enter the length of the current
media.
6. Press the up or down arrow button to select a roll length from 3 to 3280 feet (1 and 999.5 m) long
and press the OK button.
Note: You can select the roll length in 19.7 inch (0.5 m) increments.
After a moment you see the message Ready on the product control panel indicating that it is ready
to print.
Parent topic:
Related references
Media Setup Menu Settings
Related tasks

Saving Sets of Media Settings

Saving Sets of Media Settings
You can store sets of media settings for each type of media you use. This lets you quickly select all the
necessary settings whenever you print on that media type.
The media settings include the options selected and stored for each media bank or RIP setting you
created.
Note: Make sure that you loaded the media type for which you are selecting settings.
1. Press the Menu button on the product control panel.
2. Select the Media Setup menu and press the OK button.
3. Press the up or down arrow button to select Customize Settings and press the OK button.
4. Press the up or down arrow button to select a number for the set of media settings (from 1 to 30) and
press the OK button.
5. Select Setting Name and press the OK button.
Media Handling
42