Table of Contents
Advertisement
2. Remove the spacer.
3. Tighten the screws on the product stand.
Parent topic:
Using the Spacer
Adjusting the Spacer
You can adjust the spacer to three different positions (A, B, or C) to reduce vertical creases in your
printed media. You should first use the spacer in position A, and then adjust the spacer to position B or C
if the vertical creases are not eliminated on the previous settings.
1. Remove the spacer from its storage location.
2. Use a Phillips head screwdriver to loosen the two screws on the spacer.
159
Advertisement
Table of Contents
