Table of Contents
Advertisement
Note: If colors are faint or missing even after cleaning the print head, manually clean around the print
head inside the product.
1. Press the
maintenance button on the control panel.
You see the Maintenance menu. (If printing is paused, you do not see the menu; go to step 3.)
2. Press the up or down arrow button to select Cleaning and press the OK button.
3. Press the up or down arrow button to choose one of the following cleaning options:
• All Nozzles: Select this option when you see faint printing or gaps in all rows of nozzles in the
check pattern. Go to step 5.
• Selected Nozzles: Select this option when you see faint printing or gaps in only certain rows of
nozzles in the check pattern. You can select to clean multiple nozzle rows, if necessary.
4. To select the nozzle rows for cleaning, press the up or down arrow button to highlight the row
number and press the OK button. Repeat for each row you want to clean. When you finish, select
Proceed and press the OK button.
5. Press the up or down arrow button to select the cleaning level and press the OK button.
Print head cleaning starts. When it is complete, the menu closes.
Note: If you paused printing to clean the print head, printing resumes when cleaning is finished.
6. Print a nozzle check pattern or check your printout to confirm that the nozzles are cleared.
Parent topic:
Print Head Maintenance
Related references
Printer Setup Menu Settings
Related tasks
Checking for Clogged Print Head Nozzles
119
Advertisement
Table of Contents
