Table of Contents
Advertisement
10. Rotate the handle shown here until part A is hidden from view, then stop turning the handle.
Caution: Once part A is hidden, do not turn the handle further or you may damage the roll core
holder. If part A remains visible after turning the handle fully, rewind the handle, loosen the fixing
screw, and reload the roll core on the auto take-up reel.
Parent topic:
Take Up with the Printable-Side-In
After attaching the roll core on the auto take-up reel, follow these steps to take up media with the
printable side in.
1. Guide your loaded media over the media guide bar and behind the roll core, then attach the media to
the roll core with tape as shown here. Begin with the center piece of tape, pulling the media straight
Using the Auto Take-up Reel
61
Advertisement
Table of Contents
