Cleaning The Front Cover - Epson SureColor F9200 User Manual

• Do not touch the ends of the cleaning sticks to prevent oil from your hands from damaging the print
head.
• Do not use alcohol or water to clean the nozzle surface, caps, or wiper or you may damage your
product.
• Store ink packs, secondary carriage rod grease, and waste ink out of the reach of children.
• Wear protective eyewear, gloves, and a mask when performing maintenance tasks.
• Wash your hands after performing maintenance.
Warning: If ink, waste ink, ink cleaner, or secondary carriage rod grease contact your skin, or get into
your eyes or mouth, immediately do the following:
• Thoroughly wash the substance from your skin with soapy water. If your skin becomes irritated or
discolored, contact a doctor.
• Immediately rinse the substance from your eyes with water to avoid bloodshot eyes or mild
inflammation. If you experience eye problems, contact a doctor.
• If a substance gets in your mouth, contact a doctor immediately.
• If you swallow a substance, do not induce vomiting and contact a doctor immediately. Inducing
vomiting may cause material to get in your windpipe and cause injury.
Parent topic:
Related references
Maintenance Supplies

Cleaning the Front Cover

When using the heater, condensation may form on the front cover, causing water to drip and stain the
media. Wipe any water or dirt from the front cover using a damp, soft cloth.
1. Remove the media from the printer.
2. Turn the printer off and unplug it.
Preparing for Maintenance
93