Epson SureColor F9200 User Manual page 81

Options
Tension Measurement
Feeding Tension
Take-up Tension
Feed Speed
Prevent Sticking
Restore Settings
RIP Settings options
Options
Platen Gap
Description
Selects how often tension is measured and automatically
adjusted:
Periodically: recommended for most media.
Every page: provides more precise tensioning (but slower
printing).
Select Auto for most media.
When you select Manual, you can set a value from 0 to 40.
If media creases, set the value higher than Lv32. If banding
appears, set the value lower than Lv32.
When Media Size Check is off, select Manual and set the
value based on the media width.
Select Auto for most media.
When you select Manual, you can set a value from 1 to 9.
If media wrinkles, banding appears, or ink sticks to the
back of the take-up roll, set the value lower than Lv7. If
thick media cannot be wound correctly, set the value higher
than Lv7.
Select Lv2 for most media. Select Lv1 for thin media if it is
creased, torn, stuck together, or if horizontal banding
appears.
Select On only if the media sticks to the platen when the
printer is turned on or when printing starts.
Select Yes to return all settings for the selected media to
their default values.
Description
Select 2.0 for most media. Select 1.5 if print quality is
unsatisfactory. Select 2.5 only if printouts are scratched or
smudged. Choosing a larger gap than necessary can
cause ink stains inside the printer, reduced print quality, or
shorter product life.
81