Adjusting The Media Feed - Epson SureColor F9200 User Manual

7. Examine the alignment test pattern to select the pattern number with the fewest gaps, as in pattern 2
shown here.
8. If the product control panel displays C1, press the left or right arrow button to select the number of
the best pattern in C1 and press the OK button. Repeat this step for all the color patterns.
After selecting the final color pattern number, the control panel returns to its ready status.
Parent topic:
Related references
Media Setup Menu Settings

Adjusting the Media Feed

If your printouts contain horizontal banding, uneven tint, or stripes, you need to adjust the feed of the
media. You do this by printing and examining a test pattern, and then selecting the feed adjustments you
need.
Adjust the feed using the same media type and print conditions you use for printing. For example, if you
are using the auto take-up reel, you should use it during feed adjustment. You may need to adjust the
feed again if you load media of a different width, change the feeding or take-up tension, adjust the
suction, or attach the spacer.
Before adjusting the feed, make sure you have correctly loaded the media you plan to print on and
selected all the options you plan to use for printing.
Media Handling
47