Epson SureColor F9200 User Manual page 79

Caution: Follow the instructions in the topic links below the table to use these menu settings correctly.
Setting
Media Remaining
Select Media
Customize Settings
RIP Settings
Print Media List
Customize Settings options
Options
Current Settings
Setting Name
Feed Adjustment
Platen Gap
Options
Remaining Setup
Length
Remaining Alert
Print Remaining Length
1 to 30
RIP Settings
—
—
Print
Description
Changes settings for the currently selected media.
Enter a name up to 22 characters for the media settings
bank.
Select Manual if banding persists after head cleaning and
alignment.
Select 2.0 for most media. Select 1.5 if print quality is
unsatisfactory. Select 2.5 only if printouts are scratched or
smudged. Choosing a larger gap than necessary can
cause ink stains inside the printer, reduced print quality, or
shorter product life.
79
Description
Displays and records the amount of
media remaining on a roll.
Enter the total roll length, from 3 to
3280 ft (1.0 to 999.5 m).
Enter the length at which the printer will
alert you, from 4 to 50 ft (1 to 15 m).
Prints the amount of media remaining
on the current roll before you replace it.
Selects a number for the settings bank
to use for printing.
Specifies using the software RIP
settings instead of the printer settings.
See the next table.
See the third table.
Prints the contents of media setting
banks 1 to 30.