Connecting Cables To The Expansion Card; Connecting A Backup Unit To The Expansion Card - Fujitsu PRIMERGY TX300 S7 Upgrade And Maintenance Manual

Figure 308: Securing the SAS RAID controller
Ê Secure the RAID controller with the captive screw on the RAID card holder.
9.5.1.5

Connecting cables to the expansion card

Ê Connect SAS cables to the SAS RAID controller.
I
For a complete cabling overview, please refer to section
overviews" on page
9.5.1.6

Connecting a backup unit to the expansion card

Ê If applicable, connect a BBU or FBU to the expansion card as described in
sections "Installing a BBU" on page 488
TX300 S7 / RX350 S7
851.
Upgrade and Maintenance Manual
Expansion cards and backup units
or "Installing an FBU" on page
"Cabling
496.
479