Figure 326: Connecting the FBU cable to the controller
Ê For easier access to the FBU connector, temporarily remove the SAS RAID
controller from its slot as described in sections
controller" on page 481
Ê Connect the loose end of the FBU cable to the RAID controller (see close-
up).
Ê Reinstall the SAS RAID controller as described in sections
SAS RAID controller" on page 475
page
401.
TX300 S7 / RX350 S7
or
"Removing expansion cards" on page
or
Upgrade and Maintenance Manual
Expansion cards and backup units
"Removing the SAS RAID
"Installing expansion cards" on
410.
"Installing the
503