Fujitsu PRIMERGY TX300 S7 Upgrade And Maintenance Manual page 888

Appendix
Ê Remove the air duct as described in section
on page 92.
Ê Press the Indicate CSS button (1) to highlight defective components.
Component LEDs
I
LEDs A, B and C are visible from the outside on the server rear. All other
LEDs are only visible if the server cover has been opened.
Indicator
A ID indicator
CSS
B (Customer Self
Service)
GEL
C (Global Error
LED)
D PCI card
E CPUs
F Memory
G
PSUs
H
888
Status Description
server has been highlighted using
ServerView Operations Manager or the
blue on
ID button on the front panel for easy
identification
off no critical event (CSS component)
yellow on prefailure detected (CSS component)
yellow
CSS component failure
flashing
off no critical event (non CSS component)
prefailure detected (non CSS
orange on
component)
non CSS component failure
Possible reasons:
orange
– sensors report overheating
flashing
– sensor is defective
– CPU error
– software reports an error
off PCI card operational
orange on PCI card failure
off CPUs operational
orange on CPU failure
off memory module operational
orange on memory module failure
green on PSUs operational
orange on PSU failure
Upgrade and Maintenance Manual
"Removing the system air duct"
TX300 S7 / RX350 S7