Documents You Need At Hand - Fujitsu PRIMERGY TX300 S7 Upgrade And Maintenance Manual

Before you start
Screw driver /
Bit insert
Phillips
PH0 / (+) No. 0
Hexagon bolt
Table 2: List of required tools and used screws
2.4

Documents you need at hand

Maintenance procedures may include references to additional documentation.
When preparing the maintenance task, ensure that all required manuals are
available according to the overview below.
I
– Ensure to store all printed manuals enclosed with your server in a
save place for future reference.
– Unless stated otherwise, all manuals are available online at
http://manuals.ts.fujitsu.com
ServerView Suite DVD 2 supplied with your PRIMERGY server.
For the Japanese market please use the following address:
http://jp.fujitsu.com/platform/server/primergy/manual/
44
Screw
under Industry standard servers or from the
Upgrade and Maintenance Manual
Usage Type
M3 x 4.5 mm
UFM nylon
(white)
screw
A3C40109082
UNC #4-40
(silver)
Front VGA
connector
V26827-B408-
V989
TX300 S7 / RX350 S7