ADVANCED CONFIGURATION
Removing Approvers
To remove approvers or a reminder time:
1.
Click Fax Configuration > Outbound Approvals.
2.
Click Delete,
Enabling the Outbound Approval Report
To generate and schedule fax approval reports that are sent to the Approvers.
1.
Click Fax Configuration > Outbound Approval.
2.
Check Enabled under Outbound Approval Report.
3.
Select either CSV or XML for the report format. CSV is the default.
4.
Set the report frequency.
Hours
Minutes
Day of Month
Month
Day of Week
5.
Click Save.
Example Report Frequency Settings
Run report every Sunday at 7:25 pm:
Minutes is set to 25
Hours is set to 7pm
Day of Month is set to Every day of month
Month is set to Every month
Day of Week is set to Sunday
Configuring Store & Forward Fax (T.37)
Store & Forward Fax allows users to send emails as faxes using the T.37 format. This section describes T.37
parameters. For more information on using T.37, refer to T.37 Advanced Usage
Note:
Click Defaults to restore the factory default settings.
1.
Click Fax Configuration > Store & Forward Fax (T.37).
2.
Check Enable T.37.
3.
Set parameters and click Save.
66
, for the approver or reminder time you want delete.
Select an hour for the report to run.
Select minutes to set intervals that are not on the hour.
Select Every Day of Month or a specific date.
Select Every Month or specific months.
Select Every Day of Week or select specific days.
Run report at 11:00 am on the first every month:
Minutes is set to 0
Hours is set to 11am
Day of Month is set to 1
Month is set to Every month
Day of Week is set to Every day of week
®
FaxFinder
Fax Server FF240, FF440, FF840 Administrator Guide