Creating A Restore File - Multitech FaxFinder FF240 Administrator's Manual

BASIC FAXFINDER CONFIGURATION
Field
Fax Debugging

Creating a Restore File

After you configure FaxFinder to work in your environment, create a restore point to save your settings. A restore
file allows you to restore your configuration settings if the FaxFinder is reset to factory defaults or if you make a
change you want to undo. To create a restore point:
1. Click System Configuration > Save/Restore.
2. Click Save Config. A file download window opens.
Note: Some browsers automatically save the file to a default location when you click Save Config. To save
to another location so you can find it, right-click Save Config and click Save as.
3. Click Save or OK depending on your browser.
The configuration restore file name is formatted as config_model_version_date.bin. For details on restoring a
configuration file, refer to Restoring Configuration.
40
Description
If a communication error occurs when FaxFinder attempts to send or receive a fax, FaxFinder
creates a modem log file. This is available through the FaxFinder Web Management Log menu.
When you enable Fax Debugging, the log file provides more details about the fax call. Select
On if you want to log fax debugging information or Off if you do not.
Note: Multi-Tech recommends that you turn this on as needed to collect data for
troubleshooting and turn it off when you have the more detailed log file.
®
FaxFinder Fax Server FF240, FF440, FF840 Administrator Guide