ProScan PS52682 Owner's Manual page 75

80 series monitor/receiver
Hide thumbs Also See for PS52682:
Table of Contents

Advertisement

Surround Sound Audio
Connecting an amplifier to the
jack gives you the ability to get more surround-sound
audio volume than the
SURROUND
allow.
With the connection shown here, you will be able to
adjust the volume of the surround sound audio by using
the
function on the
Rear volume
menus for prologic, prologic phantom, matrix surround,
hall surround, and stadium surround audio modes as
described on pages 32-36.
Connect the
to the input jack labeled
MONO
on the stereo amplifier. Do not use the
)
TAPE MONITOR
jack. If your amplifier does not have a
PHONO
you may need a Y-adapter (available from most
electronics supply stores) to hear sound from both
channels. Consult the amplifier owner's manual for the
manufacturer's recommended hookup.
Note: If desired, you can connect one set of surround speakers to the
TV and another set of surround speakers to an amplifier that is
connected to the TV's
AUDIO OUTPUTS SURROUNDjack.
Operation: Select prologic, prologic phantom, matrix
surround, hall surround, or stadium surround audio as
described on pages 32-36. Adjust the volume of the
surround-sound audio to the mid-range by using the
function on the
volume
AUDIO ADJUST SETUP
audio mode you have selected. Adjust the amplifier so
that the surround audio is at a normal listening level.
Center Sound Audio
Connecting an amplifier to the
jack gives you the ability to get more center-sound
audio volume than the TV will allow.
With the connection shown here, you will be able to
adjust the volume of the center sound audio by using the
Center volume
On the AUDIO ADJUST SETUP
for Dolby 3 stereo or prologic audio modes as described
on pages 31-33.
the input jack labeled
MONO
on the stereo amplifier. Do not use the
)
TAPE MONITOR
jack. If your amplifier does not have a
PHONO
you may need a Y-adapter (available from most
electronics supply stores) to hear sound from both
channels. Consult the amplifier owner's manual for the
manufacturer's recommended hookup.
Operation: Select Dolby 3 stereo or prologic audio as
described on pages 31-33.
Adjust the volume of the center sound audio to the mid-
range by using the
Center volume
menu for the audio mode you have
ADJUST SETUP
selected. Adjust the amplifier so that the center audio is
at a normal listening level.
* Optional accessories are available from most dealers and electronics
supply stores. Mail orderfom is on page 75.
speakers terminals will
AUDIO ADJUST SETUP
S SURROUND
AUDIO OUTPUT
(such
or
as
,
,
,
AUX
TUNER
CD
jack,
MONO
Rear
menu for the
(such as
or
,
,
,
AUX
TUNER
CD
jack,
MONO
function on the
AUDIO
Back of TY
e
A u d i o / V i d e o C a b l e *
To audio input jack
labeled MONO on
Back of TV
have a MONO jack, You
may need a Y-adapter as

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ps60682

Table of Contents