Table of Contents
Advertisement
8 AutoProgram the TV's channel memory scan list.
The channel memory scan list is the list of TV channel
numbers your TV will stop on when you press the
up or down button. You can program any list of channels
into the channel memory.
MENU Button and
t and -Buttons
1
To
start the TV autoprogramming itself:
1
Press
to display
MENU
the
.
MAIN
MENU
Repeatedly press - or +
to highlight
Setup
in
white. h
Press
again to
M E N U
display the
SETUP
menu.
2 Repeatedly press - or + to highlight
function in white. Then press
Details are on page 46.
1 Repeatedly press - or + to
highlight
Autoprogram
w h i t e . -+
Press
to start
MENU
Notes:
The
Active Channels
screen.
and then
ANT
connected).
9 Add or erase channels to the channel memory scan list.
You can add and erase channels from the channel memory
scan list as desired. Details are on page 47.
1
Display the
CHANNEL MEM
screen.
CHANNEL
t h e A u t o p r o g r a m
to start the TV
MENU
in
display will appear on the TV
A
input
ANT
(memory) menu on the TV
1
Press
to display
M E N U
the MAIN MENU.
2 Repeatedly press - or
+ to highlight
in
Setup
white. -
Press
again to
M E N U
display the
SETUP
menu.
4 Repeatedly press - or-
+ to highlight
Channel
in white.
memory
Press
again to
M E N U
display the
CHANNEL
menu.
MEM
Press the
button to select (underline) the
M E N U
function. Enter the number of the channel you want to add
or erase from the channel memory scan list. Press + to
enter a channel with a higher number or press - to enter a
channel with a lower number.
Press
again to exit (remove underline) the
MENU
function.
Then press - to highlight the
Then press
to add or erase the channel from the
M E N U
channel memory scan list.
Press
select
to
Scan List: in
MENU
To add a channel to
the channel memory
scan list.
Press
select
Scan List: out to
to
MENU
To erase a channel
from the channel
memory scan list.
To erase or add other channels, press + to go back up the
menu to the
function. Then repeat steps 2 and 3
C h a n n e l
for each channel you want to add or erase.
When you are finished, press the
master remote or press the - button to highlight
then press the
button to remove the menu from the
M E N U
screen.
Note: The
menu will automatically disappear from the screen
within a few seconds if no button is pressed.
C h a n n e l
Press t to enter a
channel with a higher
number.
Press-to enter e
channel with a lower
number.
Channel
function.
Scan List: out/in
to add a channel.
erase a channel.
button on the
C L E A R
and
D o n e
Advertisement
Table of Contents
