Table of Contents
Advertisement
The ProScan master remote that came packed with your
TV also controls most brands of VCR's and cable-TV
boxes. The buttons shown below can be used to operate
your TV. The rest of the buttons are used to control VCR's,
1 9
0
that the other remote buttons will control the TV. Also
displays time (if clock has been set) and channel number on
the TV screen.
Important
Note:
Most buttons on the master remote control will
not control the TV unless the remote is in the "TV Mode". If
another component button (such
Dressed. the remote will no longer be in the "TV Mode". To get
back into the "TV Mode", sirnay press the button labeled rv.-The
remote will go back into the "TV Mode" and will control the TV
again.
0
Press
up to see the next higher channel in memory,
CHANNEL
or press
down to see the next lower channel in
CHANNEL
memory.
Your TV will automatically program active channels for
your area into memory when you start the AutoProgram
described
page
feature
on
individual channels from memory
or
as VCRI,
,
C A B L E
A U D I O
46. You can also add or remove
as described on page 4 7 .
For added convenience, the simplified six-button remote
also lets you control most of the TV's operations and
functions using the advanced menu system.
0
VOLUME Buttons
3
Press
up to increase volume, or press
VOLUME
to decrease volume. The volume display will automatically
appear on the screen when you press the
0
MUTE Button
is
4
)
Press
to quickly reduce sound to its minimum level
MUTE
without affecting the picture. This is very useful during
telephone calls or other interruptions. When sound is muted,
Mute
the word
let you know you have muted the TV. To restore sound,
press
again or press
M U T E
0
Pressing the
P C
last-tuned channel. This is useful should you want to
monitor two channels.
To operate, select the first channel you want to watch. Then
select the other channel by pressing two number buttons.
The TV will now change back and forth between the two
channels each time you press the
V O L U M E
will appear on the screen for a few seconds to
up.
V O L U M E
button causes the TV to change back to the
button.
P C
down
VOLUME
buttons.
Advertisement
Table of Contents
