ProScan PS52682 Owner's Manual page 62

0
5 AUDIO OUTPUTS SURROUND Jack
0
AUDIO OUTPUTS CENTER Jack
0
3 AUDIO OUTPUTS
HI-FI (R/MONO
and LEFT) Jacks -
0
(R/MONO and
LEFT) Jacks
0
(R/MONO and
LEFT) Jacks
9 CABLE/ANTENNA
(ANT A, ANT B,
and CONVERTER
Connectors
VIDEO INPUT 2 Jack, and S-VIDEO INPUT 2 Connector
These and
AUDIO VIDEO INPUT
direct connection of video devices (such as VCR' s,
camcorders, and laser disc players) or compatible
home computers and TV games with audio/video
outputs.
- 2
The connector allows for direct
S VIDEO INPUT
connection of an S-Video device to receive the full
benefit of the S-Video format. An optional S-Video
cable is required.
Notes: Be sure to also connect the audio cables. The
S-Video cable carries only video.
small picture during picture-in-picture operation, be sure to
also connect the normal video cable. S-Video video can not
be viewed on the small picture.
Select channel 92 on the TV to see the signals from a
device connected to the
up or down, or repeatedly press the
two number buttons on the master remote control to
select channel 92.
Connections details are on pages 66-69.
0
R/MONO and LEFT) Jacks,
VIDEO OUTPUTS (SELECT VIDEO
OUTPUT Jack, and SELECT
S-VIDEO OUTPUT Connector)
0
2
jacks provide for
INPUT 2
on the
2
jacks. Press
INPUT CHANNEL
button or
INPUT
0
7 EXTERNAL
Speakers
Terminals
VIDEO INPUT 1 Jack and S-VIDEO INPUT 1 Connector
0
0
VIDEO INPUT 1 Jack, and S-VIDEO INPUT 1 Connector
These and
AUDIO VIDEO INPUT I
direct connection of video devices (such as
VCR' s, camcorders, and laser disc players) or
compatible home computers and TV games with
audio/video outputs.
-
The connector allows for direct
S VIDEO INPUT I
of an S-Video device to receive the full
connection
benefit of the S-Video format. An optional
S-Video cable is required.
Notes: Be sure to also connect the audio cables. The
S-Video cable carries only video.
If you are planning to view the signal from
small picture during picture-in-picture operation, be sure to
also connect the normal video cable. S-Video video can not
be viewed on the small picture.
Select channel 91 on the TV to see the signals
from a device connected to the
up or down, or repeatedly press the
CHANNEL
button or two number buttons on the master
remote control to select channel 9 1.
Connections details are on pages 66-69.
SURROUND
Speakers
Terminals
jacks provide for
INPUT 1
on the
jacks. Press
INPUT I
INPUT