Table of Contents
Advertisement
S-VHS or Standard VHS Camcorder (Playback)
This connection allows you to play back tapes in the
camcorder and watch them on the TV.
An S-VHS or standard camcorder can be connected
directly to your TV. If you have another device, such as a
VCR connected to the
INPUT
camcorder to the
jacks.
2
INPUT
If you have an S-VHS camcorder, connect the S-VHS
-
video cable to the
S
VIDEO INPUT
you have a standard VHS camcorder, connect the video
cable to the
jack on the back of your TV. With
VIDEO INPUT
either video connection, attach the audio cable to the
audio jack.
INPUTS I
supplied
AV IN Jack
( A u d i o / V i d e o I n )
S-VHS or Standard VHS Camcorder (Recording)
This connection allows you to record onto the camcorder
whatever is currently being displayed on the TV screen.
You will also be able to record signals from a VCR (or
similar device) that is connected to the TV's
2
jacks.
INPUT
The TV must remain turned on during recording. If you
change channels on the TV, the channel change will be
recorded on the camcorder tape unless you pause the
camcorder during recording.
You may also want to use this connection to dub or edit
VCR tapes with two or three camcorders (or VCR's). By
connecting one camcorder (or VCR) to the
and another camcorder (or VCR) to the
will be able to selectively edit and record whatever is
playing on the TV screen onto a third camcorder connected
as shown here to the
SELECT
* Optional accessories are available from most dealers and electronics supply stores.
connector on your TV. If
AUDIO
w i t h c a m c o r d e r )
or
INPUT
jacks
INPUT I
2
jacks, you
INPUT
jacks.
Notes: If your camcorder has stereo audio cables, connect left to
/
.
and right to
R
MONO
LEFT
If you are planning on using the signal from an S-VHS camcorder in
the small picture during PIP (Picture-In-Picture) operation, be sure to
also connect the normal video cable. S-VHS can not be viewed on
the small PIP picture.
Operation: If the camcorder is connected to the
jacks, select TV channel 91 to view whatever the
camcorder is playing.
If the camcorder is connected to the
TV channel 92 to view whatever the camcorder is
playing.
If you connect a surveillance system to your TV, you
will be able to record what the camera is displaying on
the TV screen by connecting another camcorder (or
VCR) to the
jacks as shown here.
SELECT
Optional S-VHS (Super VHS): If your camcorder has
an
connector, connect it
S-VHS IN
connector on the TV in addition to the audio
OUTPUT
cables.
Operation: To see the signal from a device connected
to the
INPUT
92 to see the signal from a device connected to the
INPUT
Note: Menus and displays like clock and channel do not come
SELECT OUT
through the
jacks.
The small picture from picture-in-picture can be recorded from the
SE
ECT OUT
L
jack.
Mail orderform is on page 75.
INPUT
2
jacks, select
INPUT
to
SELECT S-VIDEO
the
Advertisement
Table of Contents
