Table of Contents
Advertisement
The
mode actively decodes Dolby* surround
Dolby
stereo
encoded audio to provide left, right, and center channel
sound. The center channel makes the actor's voice appear
to come from the TV screen regardless of where you are
sitting in the room. To hear Dolby 3 stereo, you must
attach right and left front speakers to the
terminals on the back of the TV.
General Recommended Speaker Placement
for Best Dolby 3 Stereo Sound
Connect these speakers
to speaker connectors
labeled
EXTERNAL
back of the TV.
You can easily select
DOLBY
the SURR (surround) button on the master remote control.
You can also select
Dolby 3 stereo
as shown below. Then you
to adjust the functions to your personal preference.
Note: Dolby 3 stereo works best with Dolby surround encoded material,
but will produce clearer dialog and better stereo imaging even on normal
stereo material.
Selecting Dolby 3 Stereo Mode
on the back of the TV.
page
72. Position the speakers to the right and left of the TV
as shown above.
menu and select
2 Display the
AUDIO MODE
to display
Press
MENU
the MAIN MENU.
Press + or-to highlight
the Audio Adjust
function in white.
3
again to
display
AUDIO
ADJUST
menu.
+ or - button to
Press the
highlight
M o d e .
Then press
M E N U t o
display the
AUDIO MODE
menu.
6
Press + or - to highlight
Press
Dolby 3 stereo.
to turn
Dolby 3
MENU
on.
stereo
7
again to exit
the AUDIO MODE
the
menu and return
to
will already be highlighted.
S e t u p
*"Dolby"
symbol are trademarks of Dolby Laboratories Licensing
and the double-D
Corporation.
Manufactured under license from Dolby Laboratories Licensing Corporation.
Additionally licensed under one or more of tbe following patents: U.S. numbers
speaker
EXTERNAL
on the
by repeatedly pressing
3
STEREO
with the
menu
AUDIO MODE
use the
menu
can
3
DOLBY
SETUP
speaker connectors
EXTERNAL
Dolby 3 stereo.
menu.
AUDIO ADJUST
3
button to enter the
Press
MENU
menu to your
t h e D O L B Y 3 S E T U P
Press + or-to highlight the function.
Press
when the
function is highlighted to turn the internal speakers
Leave the
function set
off.
want to hear the sound from the TV's internal speakers
which produce the center channel sound.
Press
when the
E x t s p k r s :
M E N U
function is highlighted to turn the external right and left
speakers
or
on
off. Leave the Ext spkrs
if you want to hear the sound from the speakers
spkrs: on
connected
to the
EXTERNAL
Press
when
Volume
MENU
adjustment display. Press + to increase or - to
VOLUME
decrease the TV's volume. This volume control raises and
lowers
the volume of the internal and external speakers.
Note:
display stops before it is at full volume and
If the
VOLUME
the volume is not high enough, check the
it is set too low. Details are on page 24.
Press
when the
Balance
MENU
enter
adjustment display. Then press + or - to ? '$ '
the
BALANCE
adjust the left/right balance until the sound seems to
originate from a point halfway between the speakers.
Press
when
Center volume
MENU
adjustment display. Press + to increase the
CENTER VOLUME
volume from the center channel or - to decrease the volume
from the center channel.
Press
when
Noise seqncer
MENU
highlighted to select either
noise sequencer supplies audio noise to each audio channel
(left, right, and center) one at a time. This
check and adjust the volume level and balance to each
channel, as well as check to see if all the speakers are
working correctly.
Press
when
is highlighted to exit the
Done
MENU
menu.
S E T U P
Note:
The TV has a built-in
help
screen press
the
button to display the
help
MENU
then press + or-to highlight
Help.
display
After the
the
.
HELP MENU
to highlight
and then press the
Audio Adjust
Saving, Restoring, and Returning to Factory Settings
The TV will remember your settings+ven when you turn
it off. To prevent losing your personal settings because
someone changes them accidentally, you can save them
using the
After the settings have been
.
MEMORY MENU
saved, you can restore them at a later date using the
restore the
menu to its factory settings.
3
DOLBY
SETUP
Details are on page 39.
menu,
3
DOLBY
SETUP
preference.
(internal speakers)
on/off
on or
if you
to Int spkrs: on
(external speakers)
on/off
function set to
speaker connectors.
is highlighted to enter the
Volume limiter to see
function is highlighted to
is highlighted to enter the
(sequencer):
is
on/off
or off. The
Noise seqncer: on
allows
DOLBY 3
use
screen for
To
Dolby 3 stereo.
and
MAIN MENU
button again to
Then press the
MENU
is displayed, press + or -
HELP MENU
button. Now follow
MENU
also lets you easily
N
ME
U
if
Advertisement
Table of Contents
