Table of Contents
Advertisement
0
DISPLAY Button displays time (if clock has been set) and
channel number on the TV screen.
0
CLEAR Button
7
Pressing
quickly clears the screen of all on-screen
C L E A R
display messages (except
commercial skip count-down clock.
0
8
SURR (Surround) Button lets you switch between the eight
audio modes
(
,
STEREO
EXPANDED
PROLOGIC, PHANTOM PROLOGIC, MATRIX SURROUND, HALL
or
,
SURROUND
STADIUM
SURROUND
pages 22-36.
0
9 Arrow Buttons let you pan across the picture when it is
zoomed in. Details are on pages 14-15. They also let you
move the small picture around the screen during PIP
(Picture-In-Picture) operation. Details are on pages 18-I 9.
0
freezes the small inset picture. Details are on
pages I4 and 19.
0
CHAN (Channel) GUIDE Button lets you display 12 channels
1 1
at the same time. Details are on page I7.
0
smaller. Details are on pages 14-15. These buttons also let
you change the size of the small picture during PIP (Picture-
In-Picture) operation. Details are on pages 18-l 9.
0
1 3 PIP (Picture-In-Picture) Control Buttons (PIP, OFF, and
SWAP) are used to display two pictures on the TV screen at
once. The little picture can be switched with the big picture.
Details are on pages 18-19.
0
14 ANT (Antenna) Button
Because your TV has two different antenna inputs on the
back (labeled
and
A
ANT
ANT
one antenna or signal source. Press the
from one input to the other.
A n t e n n a
number display when you are watching whatever is
connected to the
input. Details are on page 41.
B
A N T
It is also used to cancel the
M u t e ) .
,
3
STEREO
DOLBY
STEREO
Details are on
).
button only
button to switch
A N T
0
once to display the
Press
MENU
again to enter or adjust that function or display the next
menu. Details about using eachfunction begin on page 13.
0
jacks. Pressing this button switches the TV from its current
channel directly to channel 9 1, and then to channel 92.
Channel 91 lets you view the signal from a component
,
connected to the
jacks.
2
INPUT
return to normal channels.
0
17 CS (Commercial Skip) Button
Use this button when you want to scan other channels
during a commercial break. When a program break occurs,
press
once before changing channels. The TV will
cs
count down 30 seconds on the screen and then
automatically switch back to the original channel you were
watching.
Press
twice if you want the TV to count down 60
cs
seconds. Each additional press will add another 30 seconds
to the count-down time (up to four minutes) and then each
additional press will add another 60 seconds to the
countdown time (up to 60 minutes).
To cancel, press
disappear from the screen, and the TV will stay tuned to the
channel it was on when you pressed
0
using the
CHANNEL
buttons (first one, then the other) to select a channel. For
example, press 0 then 6 for channel 6.
To select a 3-digit cable channel (like 127), press and hold
number button 1 until
more number buttons.
number 128 when the
Check with your cable company to determine which
channels are available in your area.
0
on. The
P O W E R
TV off and on.
then press +
,
MAIN MENU
jacks and channel 92 accesses the
I N P U T 1
up or down button to
Press the
CHANNEL
countdown clock will
. The
CLEAR
.
C L E A R
buttons. Always press two number
I-
TV will tune up to channel
Your
function is set to Cable.
Cable/Air
button on the simplified remote turns the
or
MENU
I N P U T
Advertisement
Table of Contents
