Table of Contents
Advertisement
Starting Channel Guide
with master remote control
To start channel guide, press the
on the master remote control.
The screen will display all the channels that are
l
programmed into the channel memory scan list, 12 at a
time.
To see the next 12 channels, press the + button.
l
To see the previous 12 channels, press the - button.
l
Each little screen will display a stop-action picture that will
l
be continuously updated.
While the 12 channels are on the screen, you can use the
l
button to enlarge the picture and then use the arrow
ZOOM
buttons to pan around the screen. To return to normal size,
OUT.
press and hold
Note: When using the ZOOM feature, you will see a mosaic effect as
the picture is made larger.
Some channels were programmed into the channel memory
Notes:
scan list at the factory. These are the channels that will appear during
channel guide unless you AutoProgram
as described on pages 46-47.
erase channels
If the Channels: normal/priority function is set to priority, only the
channels in the priority channel scan list will appear. See
d e t a i l s .
Stopping Channel Guide
To select one of the channels being displayed in the channel
l
guide, press the
up or down button to highlight the
CHANNEL
channel number (white box with black numbers), and then
press the
button. This will stop channel guide and
MENU
take you directly to the channel you selected.
Another way to stop channel guide is to press the
l
(channel)
button again.
GUIDE
(channel)
button
CHAN
GUIDE
the channel memory or add and
page 42 for
CHAN
Starting Channel Guide
with menus
Press the
button to display the
MENU
the + or - button to highlight the
Press
again to start displaying the channels on the
MENU
screen.
1
Press MENU to display
the MAIN MENU.
2 Repeatedly press the -
-button to highlight
Channel Guide.
3 Press MENU again to
start Channel Guide.
The screen will display all the channels that are
l
programmed into channel memory scan list, 12 at a time.
To see the next 12 channels, press the + button.
l
To see the previous 12 channels, press the - button.
l
Each little screen will display a stop-action picture that will
l
be continuously updated.
While the 12 channels are on the screen, you can use the
l
button on the master remote control to enlarge the
ZOOM
picture and then use the arrow buttons to pan around the
screen. To return to normal size, press and hold
master remote control.
Note: When using the ZOOM feature, you will see a mosaic pattern as
the picture is made larger.
Some channels were programmed into the channel memory scan
Notes:
list at the factory. These are the channels that will appear during channel
guide unless you AutoProgram
the channel memory or add and erase
as described on pages 46-47.
channels
If the Channels: normal/priority function is set to priority, only the
channels in the priority channel scan list will appear. See
d e t a i l s .
Stopping Channel Guide
To select one of the channels being displayed in the channel
guide, press the
up or down button to highlight the
CHANNEL
channel number (white box with black numbers), and then
press the
button. This will stop channel guide and take
MENU
you directly to the channel you selected.
.
Then press
MAIN MENU
Channel Guide
function.
OUT
on the
page 42 for
Advertisement
Table of Contents
